Author: MortarArt
Subject: X99 Extreme4 does not detect Samsung Pro 950 M.2
Posted: 11 May 2016 at 11:44am
I'm also using the X99 Extreme4, and I just got a 256gb Samsung 950 Pro. I may not be following the instructions correctly, but I just updated to ASRock's 3.3 BIOS, and I can't see the device in UEFI, under the M.2 storage list, nor in Windows 10 Drive Manager, and when I install the Samsung NVME Driver, it reports; "Samsung NVM Express Device is not connected. Connect the Device and try again."
Edited by MortarArt - 2 hours 42 minutes ago at 11:49am
Subject: X99 Extreme4 does not detect Samsung Pro 950 M.2
Posted: 11 May 2016 at 11:44am
I'm also using the X99 Extreme4, and I just got a 256gb Samsung 950 Pro. I may not be following the instructions correctly, but I just updated to ASRock's 3.3 BIOS, and I can't see the device in UEFI, under the M.2 storage list, nor in Windows 10 Drive Manager, and when I install the Samsung NVME Driver, it reports; "Samsung NVM Express Device is not connected. Connect the Device and try again."
My specs are:
- i7 5820k
- 2x16gb Corsair DDR4
- PCIe2 - AMD R9 290
- 120gb SATA Corsair SSD, 2x3tb, 1x2tb, 1x1.5tb, 1x1tb & 1x640gb SATA drives.
- 850 Antec semi-modular PSU
I don't have a device in the disabled SATA3 port ... and I should add that after installing the Samsung 950, Storage in BIOS lists 1 less SATA3 port.
I am not attempting to install windows on this device.
Edited by MortarArt - 2 hours 42 minutes ago at 11:49am