Author: dka56
Subject: Slow render/high temp with Win 10 & Extreme 4
Posted: 15 Feb 2016 at 12:45pm
I do have them hooked to the molex since the case has a fan speed control but I would like them on the MB...may look into that.
Subject: Slow render/high temp with Win 10 & Extreme 4
Posted: 15 Feb 2016 at 12:45pm
I do have them hooked to the molex since the case has a fan speed control but I would like them on the MB...may look into that.
I didn't have any immediate plans to OC the chip when I built the rig, but was going to in the future....I do have a D15 cooler coming in the next couple days so I will wait for that to arrive before any OC'ng.
I may have had the Turbo enabled thinking it would be fine with the stock cooler as long as I didn't change anything else...but apparently that's not the case so I have it disabled for now.
What's going on now is my v core volts are low and they stay low under load. During a render with turbo disabled, my volts are 1.03-1.04. They will rise as far as 1.39 under Turbo @ 4.5 Ghz which is a little high.
So I definitely need to get the new cooler in there and go from there...yes, the load and volts are all over the place so after the cooler is upgraded we can figure out the rest.
I'm still unsure of the stock cooler fan speed...is 2000 RPM the max or should it be higher under load?