Author: Xaltar
Subject: Can't Detect 960 EVO SSD on H270M-Pro4
Posted: 17 Feb 2017 at 11:08pm
Parsec is our storage guru here but as he is not on at the moment I will hazard a few quick suggestions.
Subject: Can't Detect 960 EVO SSD on H270M-Pro4
Posted: 17 Feb 2017 at 11:08pm
Parsec is our storage guru here but as he is not on at the moment I will hazard a few quick suggestions.
At this point your goal should be to get the drive to detect so lets forget about UEFI settings for a moment and just start over. Remove all other drives (including USB drives).
Clear CMOS, remove the battery as well to make sure it is a thorough clear. Follow this method:
http://forum.asrock.com/forum_posts.asp?TID=630&title=how-to-clear-cmos-via-battery-removal (copy paste link)
Once you have cleared the CMOS, install the drive in the upper most M.2 slot and see if it is showed in the system browser in your UEFI. If it is not, power down, remove power and clear CMOS again (just the jumper should be adequate) with the drive installed. Rinse and repeat for the other slot if no success.
Post back your findings.