Author: kelly
Subject: onboard HDMI not working
Posted: 04 Feb 2017 at 4:28pm
yes, motherboard (both) have only one Ultra M.2 slot and physically impossible install SSD incorrect (wrong orientation, etc). for summarize:
1) i install SSD to H170M?PRO4 (bios version 7.00 from the box) and connect monitor with HDMI cable - got black screen and no signal for monitor
2) i replace HDMI to D-SUB (VGA) cable (nothing touch more) - and all begin work
3) i successfully install windows 10 (x64 1607) on this SSD (no other hard drives) - all ok (and this prove that SSD correct physically installed in M.2 slot). reboot several time - ok. (UEFI install)
4) i set Ultra Fast Boot in bios - after this system not load - in bios i not view SSD - M.2 slot shown as "empty"
5) i return to normal/Fast Boot - system (windows) loaded ok
6) i download latest 7.10 bios version for update bios under Windows® - run exe from Windows
7) after update i verify that bios version become 7.10 and system (windows) ONCE booted ok.
8) after reboot - i can not boot more, even can not enter BIOS - system hung at Asrock splash screen
9) clear CMOS not help
10) only remove SSD from M.2 helped. install again hung.
11) after all this insert this SSD for test in MSI B250M PRO-VH motherboard (bios 1.0 from the box)
12) no video signal at all - by HDMI and by D-Sub here. system off when press power button
13) on this motherboard exist debug leds - and it show that GPU init fail (in both case i use IGD - from i7)
14) without SSD in M.2 video signal work ok. install M.2 back - again GPU fail led fire and black screen
15) remove SSD and update bios to latest 1.2 version with flash. bios updated successfully
16) after insert SSD again to M.2 - again GPU init fail. but now power button already not worked - only unplug the power-cord help off
Subject: onboard HDMI not working
Posted: 04 Feb 2017 at 4:28pm
yes, motherboard (both) have only one Ultra M.2 slot and physically impossible install SSD incorrect (wrong orientation, etc). for summarize:
1) i install SSD to H170M?PRO4 (bios version 7.00 from the box) and connect monitor with HDMI cable - got black screen and no signal for monitor
2) i replace HDMI to D-SUB (VGA) cable (nothing touch more) - and all begin work
3) i successfully install windows 10 (x64 1607) on this SSD (no other hard drives) - all ok (and this prove that SSD correct physically installed in M.2 slot). reboot several time - ok. (UEFI install)
4) i set Ultra Fast Boot in bios - after this system not load - in bios i not view SSD - M.2 slot shown as "empty"
5) i return to normal/Fast Boot - system (windows) loaded ok
6) i download latest 7.10 bios version for update bios under Windows® - run exe from Windows
7) after update i verify that bios version become 7.10 and system (windows) ONCE booted ok.
8) after reboot - i can not boot more, even can not enter BIOS - system hung at Asrock splash screen
9) clear CMOS not help
10) only remove SSD from M.2 helped. install again hung.
11) after all this insert this SSD for test in MSI B250M PRO-VH motherboard (bios 1.0 from the box)
12) no video signal at all - by HDMI and by D-Sub here. system off when press power button
13) on this motherboard exist debug leds - and it show that GPU init fail (in both case i use IGD - from i7)
14) without SSD in M.2 video signal work ok. install M.2 back - again GPU fail led fire and black screen
15) remove SSD and update bios to latest 1.2 version with flash. bios updated successfully
16) after insert SSD again to M.2 - again GPU init fail. but now power button already not worked - only unplug the power-cord help off