Author: ASRock_TSD
Subject: Z170 Fatal1ty gaming k4 not booting
Posted: 24 Jan 2017 at 6:28pm
Dear spartakiss,
Subject: Z170 Fatal1ty gaming k4 not booting
Posted: 24 Jan 2017 at 6:28pm
Dear spartakiss,
Greetings, this is ASRock TSD.
According to your question, we provide some suggestions to verify:
1. Confirm the ATX 24-pin power cord and 8-pin v-core power cable are connected to M/B properly.
2. Please refer to the user manual(page.19) from the link below to clear CMOS to try(Please shut down the AC power).
3. Please clean the Goldfinger parts of memory and re-connect to the motherboard, make sure it has been installed correctly.
4. Remove the CPU and check if the CPU socket pin-bent.
5. Only install the necessary devices (CPU and one stick memory ) to check if the system can boot properly.
6. Only install one stick memory module to each DRAM slot by turns to try.
7. If possible, please install another memory module / CPU to verify.
8. If possible, please connect another display cable / monitor to verify.
Thanks!
All the best,
ASRock TSD