Author: Brenner
Subject: RAID Setup Menu
Posted: 16 Jan 2017 at 9:35pm
Hi, thanks for your help...
Subject: RAID Setup Menu
Posted: 16 Jan 2017 at 9:35pm
Hi, thanks for your help...
I created the RAID drive using the BIOS. There was only one way to do it that I could see.
I used a bootable USB flash drive with a windows ISO on it. It was listed as the default boot device.
I used the custom windows installation.
I used the IRST 15.2 F6/"SATA Floppy Image" driver from my board's download page. It was version 15.2.
In the windows installation I tried using the format command, and then partioning the drive. Windows did not proceed automatically. It gave me a message telling me that it was unable to use the RAID drive as a bootable drive due to hardware limitations, and it was unable to partition the drive.
Everything worked fine right up until the point where I needed Windows to install itself on the Raid drive.