Author: wbb1977
Subject: Asrock Extreme 4 + EVGA 1050ti - no signal boot
Posted: 09 Jan 2017 at 4:43am
Hello
My new Asrock Z170 Extreme 4 (running Uefi ver. 7.00) does not seem to initialize the EVGA Geforce 1050ti correctly. During boot I can not see any messages and not go to Uefi because I have no monitor signal (connected via HDMI). As soon as the OS is loaded and the gfx driver are loaded I get a signal.
If I replace the 1050ti with my GTX570 I have no problems at all. I can see the boot messages and go to the Uefi. Signal is there from the moment I power up the PC.
I tried clearing CMOS multiple times, without success. With the 1050ti I get not signal at boot.
Pluging the HDMI cable into the onboard GPU (6700k) does not work also, as in the Uefi there is no "Auto" setting for the Display. You can only choose "Onboard" or "PCI express".
To reach the Uefi I have to remove the 1050ti and use the onboard GPU. This is no good solution.
At first I thought the 1050ti was faulty. I returned the unit and got a new one. Still no signal, so my only guess is that the motherboard have some problems with the 1050ti.
Is there anything I can do? Any chance for a updated Uefi version for this motherboard?
Thanks for any ideas.
Edited by wbb1977 - 3 hours 37 minutes ago at 4:54am
Subject: Asrock Extreme 4 + EVGA 1050ti - no signal boot
Posted: 09 Jan 2017 at 4:43am
Hello
My new Asrock Z170 Extreme 4 (running Uefi ver. 7.00) does not seem to initialize the EVGA Geforce 1050ti correctly. During boot I can not see any messages and not go to Uefi because I have no monitor signal (connected via HDMI). As soon as the OS is loaded and the gfx driver are loaded I get a signal.
If I replace the 1050ti with my GTX570 I have no problems at all. I can see the boot messages and go to the Uefi. Signal is there from the moment I power up the PC.
I tried clearing CMOS multiple times, without success. With the 1050ti I get not signal at boot.
Pluging the HDMI cable into the onboard GPU (6700k) does not work also, as in the Uefi there is no "Auto" setting for the Display. You can only choose "Onboard" or "PCI express".
To reach the Uefi I have to remove the 1050ti and use the onboard GPU. This is no good solution.
At first I thought the 1050ti was faulty. I returned the unit and got a new one. Still no signal, so my only guess is that the motherboard have some problems with the 1050ti.
Is there anything I can do? Any chance for a updated Uefi version for this motherboard?
Thanks for any ideas.
Edited by wbb1977 - 3 hours 37 minutes ago at 4:54am