Author: wardogSubject: Windows 10 HDMI no signal
Posted: 18 Nov 2016 at 1:12pm
![Originally posted by Bitfiddler]( "Originally posted by Bitfiddler") Bitfiddler wrote:
I have a windows 10 64 bit machine with all available updates. I have an evga nvidia 1080 gtx card with latest nvidia drivers. I have an asrock z170 itx mb with latest bios (7.1). I have PCI selected as my primary graphics card. I have disabled the onboard graphics in the BIOs. When the hdmi port from my vid card is connected to my monitor, there is signal during the BIOS boot process, then I see the windows icon and about 2 seconds of the loading spinny wheel, then the screen goes black and no signal.
If I boot into the BIOS, the hdmi output works fine so it's not a monitor, mb or graphics card issue. I have tested the cable and monitor using my wife's laptop and they work fine over hdmi. Monitor has a native 1920x1080 resolution. It's something in Windows 10 that decides it doesn't like HDMI at some point during the boot process. I have tried uninstalling and re-installing drivers. No luck. I have tried resetting the bios using the button on the back. No luck.
Everything I have read about this problem in online forums I have already tried without progress. Does anyone have any other ideas as to what I can try? |
Go back to the earleir than 7.xx BIOS. Graphic issues have been a bugger boo with a BIOS 7.xx that is for Kaby Lake, not Skylake.
Hence the jump to revision 7.xx BIOSes.
Edited by wardog - 3 minutes ago at 1:13pm
Bitfiddler wrote:
