Author: Chrysor
Subject: Z170 Gaming K6+ need better voltage offset options
Posted: 14 Nov 2016 at 8:09am
Hi!
I just purchased the Z170 Gaming K6 and I have the same problem as OP. When I leave VCore Voltage on Auto it goes up to nearly 1.4V under load. That's why I want to use Offset Mode. With Offset on Auto the Voltage is at around 1.25V, which is OK. But I'd like to go a bit lower in Voltage, since my cpu still gets quite hot.
The problem is that I somehow only can use a negative Offset of -100mV, which automatically gets filled in when I just type the minus character. I can't set the offset to any value between -100 and 0 mV. But positive Values are working just fine... To me this seems to be a bug and I'd appreciate if ASRock could confirm and fix this.
Subject: Z170 Gaming K6+ need better voltage offset options
Posted: 14 Nov 2016 at 8:09am
Hi!
I just purchased the Z170 Gaming K6 and I have the same problem as OP. When I leave VCore Voltage on Auto it goes up to nearly 1.4V under load. That's why I want to use Offset Mode. With Offset on Auto the Voltage is at around 1.25V, which is OK. But I'd like to go a bit lower in Voltage, since my cpu still gets quite hot.
The problem is that I somehow only can use a negative Offset of -100mV, which automatically gets filled in when I just type the minus character. I can't set the offset to any value between -100 and 0 mV. But positive Values are working just fine... To me this seems to be a bug and I'd appreciate if ASRock could confirm and fix this.