Author: Bdad
Subject: H170M-ITX/DL - No Post
Posted: 11 Nov 2016 at 9:43am
Appreciate any help.
Subject: H170M-ITX/DL - No Post
Posted: 11 Nov 2016 at 9:43am
Appreciate any help.
New build using an ASRock H170M-ITX/DL mobo
i3-6100 3.7ghz LGA1151
2x4Corsair DDR$ 2400mhz Vengeance LPX ram
Sandisk 240gb SSD
Samsung DVD
Corsair CX-430
To add later: 4tb WD HDD (but not connected now)
Powers up. Can hold the power button and it will power off. DVD shows power.
No beeps. Nothing on the monitor at all.
I've built a lot of systems and am thinking I'm just missing something simple. I assume i have the power/reset/and related cables correct but I will say the diagram on page 19 of the booklet leaves me wondering if the connectors should to across or vertical. That is looking at the diagram it appears the hdled connector goes vertical rather than horizontal.
The fact that nothing comes up on the screen at all with no noise...
Thoughts? Is it possible the 2400 DDR needs to be 2100? I tried 1 stick in each of the 2 slots but nothing.