Author: parsec
Subject: H170M Pro4 Package C-States
Posted: 18 Sep 2016 at 8:04pm
Do you also have, in the CPU Configuration screen, CPU C States Support and Enhanced Halt State (C1E) set to Enabled?
When CPU C States Support is enabled, you should then see a list of the other C State options displayed, which must be enabled.
The Package C State is a single C State that requires the other C States to be enabled. The CPU cannot enter the Package C State until all the other C States are active.
The Windows Power Plan you use can affect the C State activation.
Edited by parsec - 9 hours 42 minutes ago at 8:05pm
Subject: H170M Pro4 Package C-States
Posted: 18 Sep 2016 at 8:04pm
| Image may be NSFW. Clik here to view.  craxity wrote:Hello, I'm using an Asrock H170M Pro4 with an i7-6700 and 32 GB DDR4-2133 from Crucial as a homeserver. Although I have activated Package C-State in BIOS ThrottleStop shows, that only c2 is working. The system is freshly installed under windows 7 with the newest drivers for every component. The operating system is installed on a Samsung XP941 256GB and there are 4 hard drives. Two WD Red 2TB and two Seagate NAS HDD 3TB. Does anyone have any suggestions how to activate the other Package C-States? |
Do you also have, in the CPU Configuration screen, CPU C States Support and Enhanced Halt State (C1E) set to Enabled?
When CPU C States Support is enabled, you should then see a list of the other C State options displayed, which must be enabled.
The Package C State is a single C State that requires the other C States to be enabled. The CPU cannot enter the Package C State until all the other C States are active.
The Windows Power Plan you use can affect the C State activation.
Edited by parsec - 9 hours 42 minutes ago at 8:05pm
