Author: Nichixon
Subject: ASRock H170 Pro4/Hyper problem
Posted: 15 Sep 2016 at 1:29am
They're connected properly.
Checked, looks fine to me.
Cleared as per instructions on page 18 of the manual.
Don't know how to do that. Could not find it in the manual.
The jumper is properly positioned as per written instructions.
Conclusion: nothing helped, and my mouse is flickering constantly. The computer does not turn on or produces any sounds. Pics of work below.
![]()
![]()
![]()
![]()
![]()
Edited by Nichixon - 1 hour 8 minutes ago at 3:17am
Subject: ASRock H170 Pro4/Hyper problem
Posted: 15 Sep 2016 at 1:29am
 Xaltar wrote:Lets start with some troubleshooting here: 1. Make sure you have the power cables connected correctly, especially the 8pin CPU power cable. Make sure it is not PCIe 8pin power cable. |
They're connected properly.
| Xaltar wrote: 2. Remove the CPU and check for bent pins in the socket and that the CPU was installed in the correct orientation. |
Checked, looks fine to me.
| Xaltar wrote: 3. Clear CMOS via the jumper being sure to follow the instructions in the user manual. |
Cleared as per instructions on page 18 of the manual.
| Xaltar wrote: 4. Try setting your BIOS to BIOS B via the BIOS select jumper. |
Don't know how to do that. Could not find it in the manual.
| Xaltar wrote: If the chipset is heating up (and I assume you mean very hot) then there is some kind of short somewhere or the power is not correctly connected. Make sure the clear CMOS jumper is not set in the clear position. If none of the above steps help then post back here. |
The jumper is properly positioned as per written instructions.
Conclusion: nothing helped, and my mouse is flickering constantly. The computer does not turn on or produces any sounds. Pics of work below.
Edited by Nichixon - 1 hour 8 minutes ago at 3:17am